Structured Network & AV Cabling Albuquerque, NM | Professional Low-Voltage Installation
Serving Albuquerque & the Rio Grande Valley

Structured Network & AV Cabling Albuquerque, New Mexico

We design, route, terminate, and certify structured network and AV cabling systems throughout Albuquerque and the Greater Albuquerque area β€” from Cat6A horizontal runs and fiber optic backbone installations to HDMI, DisplayPort, SDI, and HDBaseT signal cabling for video walls, control rooms, and broadcast studios.

Cat6A
10GbE Certified
100m
HDBaseT Run Length
12G
SDI Broadcast Ready
12 Mo
Installation Warranty
Structured network and AV cabling installation in Albuquerque β€” organized Cat6A patch panel with labeled cable runs in a commercial telecommunications closet
Albuquerque, NMGreater Albuquerque Area
Explore More

AV & Display Services

Core Services

What We Design, Install & Certify

Our licensed low-voltage technicians handle every phase of a structured cabling project: site survey and cable pathway design, conduit and cable tray installation, horizontal and backbone cable pulling, termination at patch panels and wall plates, and certification testing with calibrated test equipment. Whether we are wiring a 24-drop Cat6A network for an Albuquerque corporate office or pulling 12-strand single-mode fiber between IDF closets in a Los Lunas industrial facility, we deliver installations that meet or exceed TIA-568 performance standards and New Mexico code requirements.

AV cabling for video wall systems demands a different discipline from standard IT network cabling. HDMI 2.1 cables running signal at 48 Gbps have strict bend-radius and length limitations. Fiber-optic HDMI extenders require precision polishing and insertion-loss testing. SDI cables for broadcast environments must be impedance-matched at 75 ohms throughout every termination. We apply the correct technique for each cable type and verify performance with calibrated test equipment before any signal equipment is connected.

Cat6A & Copper Cabling

Cat6A shielded and unshielded horizontal runs certified to TIA-568.2-D for 10GbE and HDBaseT AV systems across Albuquerque and Greater Albuquerque.

Fiber Optic Backbone

Single-mode OS2 and multimode OM4 fiber backbone installation and OTDR-tested termination for campus and building networks.

AV Signal Cabling

HDMI 2.1, DisplayPort 1.4, fiber-optic HDMI, HDBaseT, and 12G-SDI cabling for video walls and broadcast environments throughout Greater Albuquerque.

Certification & Testing

Fluke DSX2-8000 cable certification and OTDR fiber testing with full printed test reports delivered at project close.

Services & Cable Types

Network & AV Cabling Services We Install in Albuquerque

Our team installs and certifies structured cabling systems for a wide range of commercial environments and signal types throughout Albuquerque and Greater Albuquerque:

  • Cat6A shielded & unshielded horizontal cabling to TIA-568.2-D
  • Cat6 structured cabling for 1GbE standard office networks
  • Single-mode and multimode fiber optic backbone installation
  • HDMI 2.1 and DisplayPort 1.4 AV signal cabling for video walls
  • Fiber-optic HDMI (AOC) for long-distance signal runs
  • SDI (3G / 6G / 12G-SDI) broadcast signal cabling & termination
  • HDBaseT cabling for HDMI and control over Cat6A up to 100 m
  • Conduit and cable tray installation β€” EMT, rigid, and flexible
  • Patch panel rack termination and labeling
  • Speaker and audio cabling for distributed sound systems
  • Control cabling β€” RS-232, RS-485, Ethernet, and DMX
  • Fluke DSX2-8000 cable certification & OTDR fiber testing
Technical Reference

Cabling Standards & Performance Specifications We Install To

The table below summarizes the cable categories, applicable standards, and performance benchmarks our team installs and certifies across Albuquerque and Greater Albuquerque projects:

Cable Type Standard Max Bandwidth / Speed Max Run Length Primary Application
Cat6A (U/UTP or F/UTP)ANSI/TIA-568.2-D10 GbE (10GBASE-T)100 m channelNetwork drops, PoE, HDBaseT AV
Cat6 (UTP)ANSI/TIA-568.2-D1 GbE (1000BASE-T)100 m channelStandard office network drops
OM4 Multimode FiberANSI/TIA-568.3-D100 GbE (100GBASE-SR4)150 m @ 100GIDF-to-MDF backbone, AV over IP
OS2 Single-Mode FiberANSI/TIA-568.3-D100 GbE+10 km+Campus backbone, long-distance AV
HDMI 2.1 (48G)HDMI 2.1 Specification48 Gbps (8K/60, 4K/120)5–10 m copper; unlimited AOCVideo wall processors, displays
12G-SDI (BNC / 75Ξ©)SMPTE ST 208211.88 Gbps (4K/60)70 m (RG-6)Broadcast control rooms, studios
HDBaseT (Cat6A)HDBaseT Alliance Spec10 Gbps (4K/60 + control)100 mAV signal extension, conference rooms
Fiber-Optic HDMI (AOC)HDMI + OM3/OM4 fiber18 Gbps (4K/60)100–300 mLong-distance video wall signal runs
Local Expertise

Cabling Environments We Serve Across Albuquerque

Greater Albuquerque encompasses a diverse range of commercial and industrial environments β€” from energy sector campuses to healthcare facilities and broadcast studios β€” each with distinct cabling infrastructure requirements.

Central Albuquerque

Corporate HQ & Energy Sector Cabling

Cat6A deployments in Albuquerque’s corporate and energy offices connecting conference room AV systems, wireless access points, and PoE controls across multi-floor office towers β€” coordinated with building management and installed to fire-rated penetration requirements.

Westside Albuquerque

High-Rise Office & Financial Cabling

High-density Cat6A and fiber optic backbone installations for Albuquerque’s business district β€” structured cabling for executive suites, trading floors, and enterprise AV systems requiring 10GbE performance and full Fluke certification.

South Valley / Los Lunas

Industrial & Broadcast Facilities

Hybrid cabling for Albuquerque-area production and industrial facilities combining Cat6A network drops, fiber optic backbone, and 75-ohm SDI coaxial cabling for camera feeds and operations center monitor walls.

UNM Health Sciences

Healthcare Campus Network Cabling

Full-service structured cabling for Albuquerque’s medical center β€” plenum-rated Cat6A, fiber backbone between buildings, and AV signal cabling from central equipment rooms to patient areas, conference rooms, and wayfinding displays.

How We Work

Our Cabling Process β€” From Site Survey to Certification

Every cabling project in Albuquerque begins with a site walk-through to map cable pathways, identify conduit routing through walls, ceilings, and floors, and determine pull-box and junction-box locations required by NEC code for runs exceeding 360 degrees of combined bends. For plenum spaces above drop ceilings, we verify ceiling tile accessibility and select CMP-rated cable compliant with New Mexico building codes and NFPA 90A smoke-spread requirements.

01

Site Survey

Free site walk-through mapping cable pathways, conduit routing, pull-box locations, and power separation requirements.

02

System Design

Full cable pathway design with patch panel layouts, conduit plans, and as-built documentation templates prepared before any work begins.

03

Installation

Cable pulling, conduit and tray installation, termination at patch panels and wall plates β€” per NEC and New Mexico building code.

04

Certification & Handover

Fluke DSX2-8000 testing for copper, OTDR fiber testing, printed certification reports, and as-built documentation delivered at project close.

Every installation is delivered with a 12-month warranty and printed Fluke certification test reports for every copper and fiber run.

Service Areas

Service Areas Near Albuquerque

Resources

Blog & Resources

FAQ

Frequently Asked Questions

What types of cabling do you install for AV systems in Albuquerque?
We install Cat6A structured cabling, single-mode and multimode fiber optic backbone, HDMI 2.1, DisplayPort 1.4, fiber-optic HDMI (AOC), 12G-SDI coaxial, HDBaseT, and control cabling including RS-232, RS-485, Ethernet, and DMX for AV systems throughout Albuquerque and Greater Albuquerque.
Do you certify cable installations in Albuquerque?
Yes. Every copper run is certified with a Fluke DSX2-8000 CableAnalyzer to TIA Category 6A channel specification, verifying wire map, insertion loss, NEXT, FEXT, return loss, and propagation delay. Fiber runs are tested with an OTDR and power meter, with all results provided in printed certification reports at project close.
What areas near Albuquerque do you serve for structured network and AV cabling?
We serve the greater Albuquerque area including South Valley, Los Ranchos de Albuquerque, North Valley, Rio Rancho, Corrales, Bernalillo, Los Lunas, Belen, Santa Fe, and Los Alamos.
How do I get a quote for structured cabling installation in Albuquerque?
Contact us at (505) 588-6986 or email [email protected] to schedule a free site assessment and receive a detailed cabling installation quote for your Albuquerque project.
Get in Touch

Contact Video Wall Installation Albuquerque

Video Wall Installation Albuquerque 2100 Louisiana Blvd NE
Albuquerque, NM 87110
Phone: (505) 588-6986
Email: [email protected]
Available Monday–Friday, 7 AM – 6 PM MT.
Emergency service available for system outages.

Get a Free Cabling Consultation

Talk to one of our low-voltage technicians about your cabling project. We’ll assess your site, design the right cabling system, and provide a detailed quote β€” at no cost.

Request a Quote

Ready to Install Structured Cabling in Albuquerque?

Talk to an engineer today and get your free site assessment.